When Your Hot Water System Suddenly Ceases Working: What to Do
When Your Hot Water System Suddenly Ceases Working: What to Do
Blog Article
They are making several good pointers about Hot Water Heater Repair overall in this article down the page.
Several modern homes take advantage of an electric water heater for their furnace, due to its comfort as well as ease of use. However, much like any other electrical appliances, problems may develop with its use, unexpectedly. It can be truly frustrating to awaken to a cool shower rather than a warm one or having your bathroom with water that isn't hot sufficient or perhaps also hot. Whatever the instance may be, hot water heater troubles can be rather aggravating. Fortunately, we've made a listing of possible solutions to your hot water heater issues. There are a number of variables that might create many of these issues, it could be an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the major power supply for safety. Whatever the trouble is, getting it dealt with ought to not pose too much of a problem if you follow these actions:
Call A Specialist:
If after changing all damaged parts and also resetting your temperature, the water heater still isn't functioning, you might need to speak to a professional plumber for an expert opinion. The problem with your heater could be that the hot and cold faucets have been switched or it may be undersized for the quantity of hot water required in your home. Whatever the situation might be, a specialist plumber would certainly assist address the trouble.
Check Your Power Supply:
As basic as this might seem, it is extremely necessary. Without sufficient power, your water heater will not work. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, merely transform it off and on once more. Change any kind of busted or damaged fuse. Check the device with power after these modifications to see if it's now functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you might need to examine the temperature setups on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red button for temperature reset over the thermostat. This must assist heat the water. Turn the breaker back on and examine if the problem has actually been fixed.
Check the Heating Element in the Hot Water Heater:
If it's not a power problem, then attempt checking out your heating element if it is still functioning. Test each of your heating elements to ensure the trouble isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards examine whether the warm water is back on.
Verdict
Water heater problems are not always significant. A number of them result from minor concerns like a blown fuse or damaged heating element. Changing the defective parts must work. Nonetheless, if you are still unable to fix the issue, give a call to your local plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid person who reads on How to Troubleshoot and Repair an Electric Water Heater, I imagined sharing that excerpt was valuable. Sharing is caring. Helping others is fun. We appreciate reading our article about Hot Water Heater Repair.
Get relief now! Report this page